71convertible parts

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fredw

New member
Joined
Jul 17, 2023
Messages
3
Reaction score
1
Location
Fruitport, Michigan
My Car
1971 mustang convertible.
looking for a chrome boot hocky center trim piece . also looking for both rear quarter window track. for 1971 convertible
 
Try Motorcity mustang? On eBay, Mike Berardi owns it and he is a really great 71-73 parts source. Send a message if you don’t see one listed. He has a parts car collection…. Also try West Coast Cougars…they have used mustang parts….
 
Try Motorcity mustang? On eBay, Mike Berardi owns it and he is a really great 71-73 parts source. Send a message if you don’t see one listed. He has a parts car collection…. Also try West Coast Cougars…they have used mustang parts….
Thanks for the info. Iam new here. Igot 71 convertible last year an stared restorind lastfall. lot fun! Fred
 
I should have an ok center piece that is behind the top well. PM me if interested. I know I have one....finding it may be a challenge lol. I may have the quarter window tracks as well. How complete do you need of those? I do not have the angles for the bottom. I also do not have a set of the travel limit pieces.
 
I should have an ok center piece that is behind the top well. PM me if interested. I know I have one....finding it may be a challenge lol. I may have the quarter window tracks as well. How complete do you need of those? I do not have the angles for the bottom. I also do not have a set of the travel limit pieces.
Yes Iam interested, I have the bottom angles , the regulators and I think the limit pieces. Do you have pictures?
 
Yes Iam interested, I have the bottom angles , the regulators and I think the limit pieces. Do you have pictures?
I have 2 of the tracks for LH? but only one track for RH. The RH one needs some wire brushing. I think the others just a hot soapy degrease. The posts are ok but need the plastic insert/guide replaced. I think NPD has them. I recently bought them somewhere for my vert, about a year ago.
 

Attachments

  • PXL_20230724_194216339.jpg
    PXL_20230724_194216339.jpg
    4.2 MB · Views: 0
  • PXL_20230724_194213110.jpg
    PXL_20230724_194213110.jpg
    4.1 MB · Views: 0
  • PXL_20230724_194156557.jpg
    PXL_20230724_194156557.jpg
    4.6 MB · Views: 0
  • PXL_20230724_194152818.MP.jpg
    PXL_20230724_194152818.MP.jpg
    7 MB · Views: 0
  • PXL_20230724_193127857.jpg
    PXL_20230724_193127857.jpg
    3 MB · Views: 0
  • PXL_20230724_193115922.jpg
    PXL_20230724_193115922.jpg
    3.4 MB · Views: 0
Yes Iam interested, I have the bottom angles , the regulators and I think the limit pieces. Do you have pictures?
And now the trim piece for the convertible well. Note there is only one captive nut. I do not not know where to get replacements. This piece is stainless and can be buffed. Overall I think it is in pretty decent shape and buffing will do it some good.
 

Attachments

  • PXL_20230724_193833610.jpg
    PXL_20230724_193833610.jpg
    3 MB · Views: 0
  • PXL_20230724_193831360.jpg
    PXL_20230724_193831360.jpg
    2.7 MB · Views: 0
  • PXL_20230724_193829320.jpg
    PXL_20230724_193829320.jpg
    2.9 MB · Views: 0
  • PXL_20230724_193824948.jpg
    PXL_20230724_193824948.jpg
    2.9 MB · Views: 0
  • PXL_20230724_193822076.jpg
    PXL_20230724_193822076.jpg
    2.4 MB · Views: 0
  • PXL_20230724_193833610.jpg
    PXL_20230724_193833610.jpg
    3 MB · Views: 0
  • PXL_20230724_193831360.jpg
    PXL_20230724_193831360.jpg
    2.7 MB · Views: 0
  • PXL_20230724_193829320.jpg
    PXL_20230724_193829320.jpg
    2.9 MB · Views: 0
  • PXL_20230724_193824948.jpg
    PXL_20230724_193824948.jpg
    2.9 MB · Views: 0
  • PXL_20230724_193822076.jpg
    PXL_20230724_193822076.jpg
    2.4 MB · Views: 0
  • PXL_20230724_193820331.jpg
    PXL_20230724_193820331.jpg
    2.7 MB · Views: 0
Back
Top